Mercedes-Benz GLK-Class: Traction - Uniform Tire Quality Grading Standards - Wheels and tires - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Traction

WARNING WARNING

The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics.

The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire's ability to stop on a wet surface as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.

WARNING WARNING

If ice has formed on the road, tire traction will be substantially reduced. Under such weather conditions, drive, steer and brake with extreme caution.

The safe speed on a wet, snow covered or icy road is always lower than on dry road surfaces.

You should pay special attention to road conditions when temperatures are around the freezing point.

Mercedes-Benz recommends a minimum tire tread depth of 1/6 in (4 mm) for all four winter tires () to maintain normal driving characteristics in winter. Winter tires can reduce the braking distance on snow covered surfaces in comparison to summer tires. Stopping distance, however, is still considerably greater than when the road is not covered with ice or snow. Take appropriate care when driving.

Temperature Avoid wheelspin. This can lead to damage to the drive train.

    Tread wear
    The tread wear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified U.S. government course. For example, a tire graded 150 would ...

    Temperature
    WARNING The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately o ...

    See also:

    Cargo Cover
    For vehicles with a cargo cover, use it to cover items in the rear of the vehicle. To remove the cover from the vehicle, pull both ends toward each other. To reinstall, place each end of the cover ...

    Clearing the programmed information
    Individual buttons cannot be cleared, however to clear all programming, push and hold the two outside buttons and release when the indicator light begins to flash (in approximately 20 seconds) ...

    Daily checks
    - Operation of lamps, horn, direction indicators, wipers, washers and warning lamps. - Operation of seat belts and brakes. - Look for fluid deposits underneath the vehicle that might indicate a l ...