Jeep Liberty: TOW/HAUL - Towing Tips - Trailer Towing - Starting And Operating - Jeep Liberty Owner's ManualJeep Liberty: TOW/HAUL

To reduce potential for automatic transmission overheating, press the TOW/HAUL button when driving in hilly areas or select the 2 range on more severe grades. Refer to “Automatic Transmission” in “Starting and Operating” for further information.

    Automatic Transmission
    The “DRIVE” range can be selected when towing. However, if frequent shifting occurs while in this range, activate the TOW/HAUL feature. Refer to “Automatic Transmission” in “Starting a ...

    Electronic Speed Control – If Equipped
    − Do not use in hilly terrain or with heavy loads. − When using the speed control, if you experience speed drops greater than 10 mph (16 km/h), disengage until you can get back to cru ...

    See also:

    If the light illuminates steadily
    If the light illuminates steadily while driving or does not turn off after the engine starts, an emission control system malfunction has been detected. You should have your vehicle checked by ...

    Cleaning after off-road driving
    Ensure that the areas around air intakes and the front grille are clean and clear of debris. Pay particular attention to the lower grille and radiator. Failure to do so may cause the engine t ...

    Operating Instructions — Radio Mode
    NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME co ...