Jeep Liberty: To Unlock The Doors And Liftgate
Press and release the UNLOCK button on the RKE transmitter once to unlock the driver’s door or twice to unlock all doors and the liftgate. The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on.
Remote Keyless Entry (RKE)
This system allows you to lock or unlock the doors and liftgate, open the liftgate flip-up window, or activate the PANIC alarm from distances up to approximately 66 ft (20 m) using a hand-held R ...Remote Key Unlock, Driver Door/All Doors First
This feature lets you program the system to unlock either the driver’s door or all doors and the liftgate on the first press of the UNLOCK button on the RKE transmitter. To change the current ...See also:
Setting a time interval
The set time interval to vehicles ahead can be
increased by pressing and decreased
by
pressing . The current time interval
is shown
briefly in the display following adjustment.
Different ...
Dome light, map light, cargo area light and door step light
When the door is opened, the map
light illuminates and becomes very
hot. When replacing the map light
bulb, close the door and be careful
not to burn yourself.
Dome light (type A)
Do ...
Using voice commands
The driver initiates a voice command dialogue
by pressing the voice control button (see the
illustration on page 241).
When a dialogue has been initiated, commonly
used commands will be shown i ...