Subaru Forester: To disengage the service mode - Service mode - Remote engine start system (dealer option) - Starting and operating - Subaru Forester Owner's ManualSubaru Forester: To disengage the service mode

Turn the ignition switch to the “ON” position, depress and hold the brake pedal, then press and release the “button on the remote control transmitter” button on the remote control transmitter three times. The system will pause for 1 second and flash the turn signal lights 1 time indicating that the system has exited service mode.

NOTE
When taking your vehicle in for service, it is recommended that you inform the service personnel that your vehicle is equipped with a remote control start system.

    To engage the service mode
    Turn the ignition switch to the “ON” position, depress and hold the brake pedal, then press and release the “” button on the remote control transmitter three times. The system will pau ...

    Remote transmitter programming and programmable feature option
    New transmitters can be programmed to the engine starter system in the event that remote transmitters are lost, stolen or damaged. The remote engine start system also has one programmable fe ...

    See also:

    Technical Information
    The diagrams in this section give you the dimensions and capacities of your vehicle and the locations of the identification numbers. It also includes information you should know about your v ...

    Fastening a seat belt
    Buckling Pull the belt out far enough to insert the latch plate into the receptacle until a distinct click is heard. The seat belt retractor is normally "unlocked" and you can move fr ...

    Power Outlets
    The accessory power outlets can be used to connect electrical equipment, such as a cell phone or MP3 player. There are four accessory power outlets in the following locations: below the CD slot, ...