Mercedes-Benz GLK-Class: Tire tread - Operation - Wheels and tires - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Tire tread

WARNING WARNING

Although the applicable federal motor vehicle safety laws consider a tire to be worn when the tread wear indicators (TWI) become visible at approximately 1/16 in (1.6 mm), we recommend that you do not allow your tires to wear down to that level. As tread depth approaches 1/8 in (3 mm), the adhesion properties on a wet road are sharply reduced.

Depending upon the weather and/or road surface (conditions), the tire traction varies widely.

Do not use tires that are excessively worn as the tire traction on wet road surfaces decreases significantly when the tread depth is less than 1/8 inch (3 mm).

Tread wear indicators (TWI) are required by law. Six indicators are positioned on the tire tread. They become visible as soon as a tread depth of approximately 1/16 inch (1.6 mm) has been reached. If this is the case, the tire is so worn that it must be replaced.

The recommended tread depth for summer tires is at least 1/8 inch (3 mm). The recommended tread depth for winter tires is at least 1/6 inch (4 mm).

Bar marking 1 for tread wear is integrated into the tire tread.

Bar marking 1 for tread wear is integrated into the tire tread.

    Notes on regularly inspecting wheels and tires
    WARNING Regularly check the tires for damage. Damaged tires can cause tire inflation pressure loss. As a result, you could lose control of your vehicle. Worn, old tires can cause accidents. I ...

    Notes on selecting, mounting and replacing tires
    Only mount tires and wheels of the same type and make. Only mount tires of the correct size onto the wheels. After mounting new tires, run them in at moderate speeds for the first 60 miles ( ...

    See also:

    Continuously Variable Transmission (CVT) position indicator
    The Continuously Variable Transmission (CVT) position indicator indicates the selector lever position when the ignition switch is in the ON position. ...

    Linking And Unlinking The Remote Keyless Entry Transmitter To Memory
    Your Remote Keyless Entry (RKE) transmitters can be programmed to recall one of two pre-programmed memory profiles with a press of the UNLOCK button on the RKE transmitter. To program your RKE ...

    Pedals
    Manual transmission Automatic transmission Clutch Pedal (1) (For manual transmission). The clutch pedal is used to disengage the drive to the wheels when starting the engine, stopping or shifti ...