Subaru Forester: Tire replacement - Tires and wheels - Maintenance and service - Subaru Forester Owner's ManualSubaru Forester: Tire replacement

The wheels and tires are important and integral parts of your vehicle’s design; they cannot be changed arbitrarily. The tires fitted as standard equipment are optimally matched to the characteristics of the vehicle and were selected to give the best possible combination of running performance, ride comfort, and service life. It is essential for every tire to have a size and construction matching those shown on the tire placard and to have a speed symbol and load index matching those shown on the tire placard.

Using tires of a non-specified size detracts from controllability, ride comfort, braking performance, speedometer accuracy and odometer accuracy. It also creates incorrect body-to-tire clearances and inappropriately changes the vehicle’s ground clearance.

All four tires must be the same in terms of manufacturer, brand (tread pattern), construction, and size. You are advised to replace the tires with new ones that are identical to those fitted as standard equipment.

For safe vehicle operation, SUBARU recommends replacing all four tires at the same time.

- All four tires must be the same in

- All four tires must be the same in terms of manufacturer, brand (tread pattern), construction, degree of wear, speed symbol, load index and size. Mixing tires of different types, sizes or degrees of wear can result in damage to vehicle’s powertrain. Use of different types or sizes of tires can also dangerously reduce controllability and braking performance and can lead to an accident.

- Use only radial tires. Do not use radial tires together with belted bias tires and/or bias-ply tires.

Doing so can dangerously reduce controllability, resulting in an accident.

    Tire rotation
    Models equipped with 4 non-unidirectional tires 1) Front Models equipped with unidirectional tires 1) Front Tire wear varies from wheel to wheel. To maximize the life of each tire and ensure ...

    Wheel replacement
    When replacing wheels due, for example, to damage, make sure the replacement wheels match the specifications of the wheels that are fitted as standard equipment. Replacement wheels are availabl ...

    See also:

    Auto high beam (green)
    Auto high beam (green) Illuminates when the auto high beam feature is enabled. ...

    Compass (if so equipped)
    When the ignition switch is turned to the ON position, the compass display B will indicate the direction of the vehicle’s heading. If the display reads “C”, calibrate the compass by d ...

    Gearshift Lever
    Manual transmission 5-speed automatic transmission Your vehicle is equipped with either a manual transmission or automatic transmission. The gearshift lever for each transmission type is shown ...