Mercedes-Benz GLK-Class: Operation
Depending on the date of manufacture of your vehicle, the or symbol for the automatic headlamp mode/daytime running lamps is located on the light switch.
Illustration: light switch with the symbol for the automatic headlamp mode/daytime running lamps
Left-hand standing lamps
Right-hand standing lamps
Parking lamps, license plate and instrument cluster lighting
Automatic headlamp mode/daytime running lamps
Low-beam/high-beam headlamps
Rear fog lamp
Front fog lamps
Illustration: light switch with the symbol for the automatic headlamp mode/daytime running lamps
Left-hand standing lamps
Right-hand standing lamps
Parking lamps, license plate and instrument cluster lighting
Automatic headlamp mode/daytime running lamps
Low-beam/high-beam headlamps
Rear fog lamp
Front fog lamps
The turn signals, high-beam headlamps and the high-beam flasher are operated using the combination switch ().
Switch off the parking lamps and standing lamps when you leave the vehicle. This prevents the battery from discharging.
The exterior lighting (except the parking/ standing lamps) switches off automatically if you:
- remove the SmartKey from the ignition lock
- open the driver's door with the SmartKey in position 0
If you hear a warning tone when you leave the vehicle, the lights may still be switched on.
Turn the light switch to or .
Light switch
...Low-beam headlamps
To switch on the low-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine. Turn the light switch to . The indicator lamp in the instrument cluster li ...See also:
Manual transmission models
Manual transmission models
The key can be turned from “Acc” to
“LOCK” only when the key is pushed in
while turning it. ...
Cargo net
Cargo net mounted in rear position
Your vehicle can be equipped with a cargo net
made of strong nylon fabric that helps prevent
objects in the cargo area from moving forward
into the passenge ...
Programming The Memory Feature
To create a new memory profile, perform the following:
NOTE: Saving a new memory profile will erase an
existing profile from memory.
1. Turn the ignition ON.
2. Adjust all memory profile settings ...