GMC Terrain: Shifting out of Park - Starting and Operating - Driving and Operating - GMC Terrain Owner's ManualGMC Terrain: Shifting out of Park

To shift out of P (Park):

1. Apply the brake pedal.
2. Turn the ignition to ON/RUN.
3. Press the shift lever button.
4. Move the shift lever.

If you still are unable to shift out of P (Park):

1. Fully release the shift lever button.
2. Hold the brake pedal down and press the shift lever button again.
3. Move the shift lever.

If you still cannot move the shift lever from P (Park), see your dealer for service.

    Torque Lock
    Torque lock is when the weight of the vehicle puts too much force on the parking pawl in the transmission. This happens when parking on a hill and shifting the transmission into P (Park) is not do ...

    Parking over Things That Burn
    WARNING Things that can burn could touch hot exhaust parts under the vehicle and ignite. Do not park over papers, leaves, dry grass, or other things that can burn. ...

    See also:

    Brake systems (amber)
    Brake systems (amber) Illuminates briefly when the ignition is switched on. If the lamp illuminates after starting the engine or while driving, suspect worn brake pads or a fault with the Emerg ...

    Windows
    Press the front of the switch to lower the window. Pull the switch up to raise it. Pushing or pulling the switch part of the way will open or close the window as long as the switch is operated. ...

    Rear seat access (coupe models)
    The front seats tilt and power slide forwards for entry to and exit from the rear seats. Operation is controlled by a lever and switch. 1. Lift the locking lever and pivot the seatback forwards. ...