Subaru Forester: Roof rail (if equipped) - Loading your vehicle - Driving tips - Subaru Forester Owner's ManualSubaru Forester: Roof rail (if equipped)

1) Roof rack

1) Roof rack

Luggage can be carried on the roof after securing the roof rack to the roof rail.

When installing the roof rack on the roof rail, follow the manufacturer’s instructions.

The roof rail is designed to carry loads (luggage and roof rack) of not more than 150 lbs (68 kg).

- When using the roof rack, make

- When using the roof rack, make sure that the total carrying load of the roof rack and luggage does not exceed 150 lbs (68 kg). Overloading may cause damage to the vehicle.

- For cargo carrying purposes, the roof rail must be used together with the roof rack and any appropriate carrying attachment that may be needed. The roof rail must never be used alone to carry cargo. Otherwise, damage to the roof or paint or a dangerous road hazard due to loss of cargo could result.

NOTE
Remember that the vehicle’s center of gravity is altered with the weight of the load on the roof, thus affecting driving characteristics.

Drive carefully. Avoid rapid starts, hard cornering and abrupt stops. Crosswind effects will be increased.

    GVWR and GAWR (Gross Vehicle Weight Rating and Gross Axle Weight Rating)
    The certification label attached to the driver’s side doorjamb shows GVWR (Gross Vehicle Weight Rating) and GAWR (Gross Axle Weight Rating). The GVW (Gross Vehicle Weight) must never ex ...

    Roof molding and crossbar (if equipped)
    - For cargo carrying purposes, the roof molding must never be used alone to carry cargo. Otherwise, damage to the roof or paint or a dangerous road hazard due to loss of cargo could ...

    See also:

    Unlocking and locking the doors and back door (front and backdoor handles only)
    Grip the handle to unlock the doors. Make sure to touch the sensor on the back of the handle. The doors cannot be unlocked for 3 seconds after the doors are locked. Press the lock button to l ...

    Customer Key Programming
    If you have two valid Sentry Keys , you can program new Sentry Keys to the system by performing the following procedure: 1. Cut the additional Sentry Key Transponder blank(s) to match the ignit ...

    Key number plate
    The key number is stamped on the key number plate attached to the key set. Write down the key number and keep it in another safe place, not in the vehicle. This number is needed to make a repla ...