GMC Terrain: Ride Control System Messages
ALL WHEEL DRIVE OFF
If your vehicle has the All-Wheel Drive (AWD) system, this message displays when the rear drive system is overheating. This message turns off when the rear drive system cools down. If the warning message stays on for a while, you need to reset the warning message. To reset the warning message, turn the ignition off and then back on again. If the message stays on, see your dealer right away. See All-Wheel Drive on page 9‑32 for more information.
SERVICE ALL WHEEL DRIVE
If your vehicle has the All-Wheel Drive (AWD) system, this message displays if a problem occurs with this system. If this message appears, stop as soon as possible and turn off the vehicle. Restart the vehicle and check for the message on the DIC display. If the message is still displayed or appears again when you begin driving, the AWD system needs service. See your dealer.
SERVICE TRACTION CONTROL
This message displays when there is a problem with the Traction Control System (TCS). See Traction Control System (TCS) on page 9‑35.
SERVICE STABILITRAK
This message displays if there is a problem with the StabiliTrak system. StabiliTrak® System on page 9‑36.
STABILITRAK OFF
This message displays when the StabiliTrak system is turned off. See StabiliTrak® System on page 9‑36 for more information.
TRACTION CONTROL OFF This message displays when the Traction Control System (TCS) is turned off. Adjust your driving accordingly.
TRACTION CONTROL ON
This message displays when the Traction Control System (TCS) is first turned on. See Traction Control System (TCS) on page 9‑35 for more information.Airbag System Messages
Object Detection System Messages
FORWARD COLLISION ALERT OFF If your vehicle has the Forward Collision Alert (FCA) system, this message may display if the FCA system cannot activate due to a temporary condition. See Forward Coll ...Airbag System Messages
SERVICE AIRBAG This message displays if there is a problem with the airbag system. Take the vehicle to your dealer for service. ...See also:
Fan speed control button
Fan speed control button
The fan speed control button has 7
different fan speed positions.
The fan speed is shown by the display. ...
Replacing fog lamp bulbs (if equipped)
1. Make sure the fog lamp switch is
in the off position.
2. From underneath the vehicle,
carefully disconnect the electrical
connector from the bulb.
3. Remove the bulb from the lamp
assembly by ...
Summer Operation
The engine cooling system in air-conditioned vehicles
must be protected with a high-quality antifreeze coolant
to provide proper corrosion protection and to protect
against engine overheating. A ...