Volvo XC60: Re-assembling the remote key - Replacing batteries in the remote key/PCC - Remote key and key blade - Locks and alarm - Volvo XC60 Owner's ManualVolvo XC60: Re-assembling the remote key

1. Press the remote key's cover into place.

2. Hold the remote key with the slot for the key blade up.

3. Carefully slide the key blade into its groove.

4. Gently press the key blade in the groove until it clicks into place.

Old batteries should be properly recycled.

    Replacing the batteries
    CAUTION When handling batteries, avoid touching their contact surfaces as this could result in poor battery function in the remote key. 3 Note the position of the battery's (+) or (–) sides ...

    See also:

    Epb warning indicators
    If the system detects a fault with the EPB, the amber brake warning indicator will illuminate accompanied by a message on the message centre. If the system detects a fault while EPB is operating, ...

    California Fuel Requirements
    If the vehicle is certified to meet California Emissions Standards, it is designed to operate on fuels that meet California specifications. See the underhood emission control label. If this fuel i ...

    Spare tire
    TEMPORARY SPARE TIRE The following instructions for the temporary spare tire should be observed: 1. Check inflation pressure as soon as practical after installing the spare tire, and adjust t ...