Range Rover Evoque: Programmed position loss

The powered tailgate may lose its position memory if there are multiple object detections or if battery voltage is low. Powered operation may be inhibited. To reset the tailgate; 1. Manually close the tailgate.

2. Press a release switch.

3. Allow the tailgate to power fully open or to the previously set position.

4. Press and release the close switch.

5. Allow the tailgate to power close fully.

The tailgate programmed position memory will now be restored.

READ NEXT:

 Changing the smart key batttery

When the battery needs renewing, there will be a significant decrease in the effective range and the message SMART KEY BATTERY LOW will be displayed in the message centre. To renew the battery:

 Exiting the vehicle

 Locking and arming the alarm

CAUTION: No modifications or additions should be made to the anti-theft system. Such changes could cause the system to malfunction. There are two levels of security: - Single locking. With all d

SEE MORE:

 Transfer Case Connecting Sleeve Seals GTDi 2.0L Petrol

Special Tool(s) 100-012 Slide Hammer 307-594 Installer, Seal 308-005 Remover, Axle oil seal Removal NOTE: Some variation in the illustrations may occur, but the essential information is always correct. 1. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle. 2.

 Bumpers

Front Bumper Cover Removal NOTE: Removal steps in this procedure may contain installation details. 1. 2. 3. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle. 4. NOTE: The step must be carried out on both sides. Refer to: Fender Splash Shield (501-02 Front E

© 2011-2024 Copyright www.rrevoque.org