Mercedes-Benz GLK-Class: Preparing the vehicle - Flat tire - Breakdown assistance - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Preparing the vehicle

  • Stop the vehicle as far away as possible from traffic on solid, non-slippery and level ground.
  • Switch on the hazard warning lamps.
  • Firmly depress the parking brake.
  • Bring the front wheels into the straightahead position.
  • Move the selector lever to P.
  • Switch off the engine.
  • Vehicles without KEYLESS-GO: remove the SmartKey from the ignition lock.
  • Vehicles with KEYLESS-GO: open the driver's door. The on-board electronics have status 0, which is the same as the SmartKey having been removed.
  • Vehicles with KEYLESS-GO: remove the Start/Stop button from the ignition lock ().
  • All occupants must get out of the vehicle. Make sure that they are not endangered as they do so.
  • Make sure that no one is near the danger area while a wheel is being changed. Anyone who is not directly assisting in the wheel change should, for example, stand behind the barrier.
  • Get out of the vehicle. Pay attention to traffic conditions when doing so.
  • Close the driver's door.
    Flat tire
    ...

    See also:

    Diagnostics
    OnStar Vehicle Diagnostics will perform a vehicle check every month. It will check the engine, transmission, antilock brakes, and major vehicle systems. It also checks the tire pressures, if the v ...

    Driving In Snow, Mud And Sand
    In heavy snow, when pulling a load, or for additional control at slower speeds, shift the transmission to a low gear and shift the transfer case to 4WD LOW if necessary. Refer to “Four-Wheel Dr ...

    Power brakes function only when the engine is running
    The power brakes utilize vacuum pressure which is only created when the engine is running. Never let the vehicle roll to a stop with the engine switched off. If the power brakes are not working, ...