Volvo XC60: Park position (P) - Transmission - Your driving environment - Volvo XC60 Owner's ManualVolvo XC60: Park position (P)

Select the P position when starting or parking.

Shiftlock

When P has been selected, the transmission is mechanically blocked in this position. The brake pedal must be depressed and the ignition must be in at least mode II (see page 82) before the gear lever can be moved from the P position.

Always apply the parking brake when the vehicle is parked. Press the control to apply the brake, see page 122.

CAUTION

CAUTION The vehicle must be stationary when position P is selected.

    Automatic transmission
    Shiftgate positions Depress the button on the front of the gear selector knob to move the gear selector between the R, N, D, and P positions. The gear selector can be moved freely between th ...

    Reverse В®)
    The vehicle must be stationary when position R is selected. ...

    See also:

    Engine overheating
    Never attempt to remove the radiator cap until the engine has been shut off and has fully cooled down. When the engine is hot, the coolant is under pressure. Removing the cap while the en ...

    To Exit Remote Start Mode And Drive The Vehicle
    Before the end of the 15-minute cycle, press and release the UNLOCK button on the RKE transmitter to unlock the doors and disarm the Vehicle Security Alarm (if equipped). Then, insert the key in ...

    Setting and storing the parking position
    You can position the front-passenger side exterior mirror in such a way that you can see the rear wheel on that side as soon as you engage reverse gear. You can store this position. Make sur ...