Mercedes-Benz GLK-Class: Opening/closing automatically from inside
WARNING
Maintain sight of the area around the rear of the vehicle while operating the tailgate with the door-mounted remote tailgate switch. Monitor the opening procedure carefully to make sure no one is in danger of being injured.
To interrupt the opening procedure, press or pull the door-mounted remote tailgate switch.
When the SmartKey is not inserted in the starter switch (vehicles with KEYLESS-GO:
Make sure the vehicle's on-board electronics have status 0): Press button
on the SmartKey.
WARNING
Maintain sight of the area around the rear of the vehicle while operating the tailgate with the door-mounted remote tailgate switch.
Monitor the closing procedure carefully to make sure no one is in danger of being injured.
To interrupt the closing procedure, press or pull the door-mounted remote tailgate switch.
WARNING
To prevent possible personal injury, always keep hands and fingers away from the cargo compartment opening when closing the tailgate. Be especially careful when small children are around.
WARNING
Make sure the tailgate is closed when the engine is running and while driving. Among other dangers, deadly carbon monoxide (CO) gases may enter vehicle interior resulting in unconsciousness and death.
You can open and close the tailgate from the driver's seat when the vehicle is stationary and unlocked.
- To open: pull remote operating switch 1 for the tailgate until the tailgate opens.
- To close: turn the SmartKey to position 1 or 2 in the ignition lock.
- Press remote operating switch for tailgate 1 until the tailgate is closed. You hear a tone during the closing procedure.
Closing
WARNING
Monitor the closing procedure carefully to make sure no one is in danger of being
injured. To prevent possible personal injury, always keep hands and fingers away
from the cargo comp ...
See also:
Warning lights and chimes
Base instrument cluster shown in standard measure. Metric similar.
Optional instrument cluster shown in standard measure. Metric
similar.
Warning lights and gauges can alert you to a vehicle co ...
To Accelerate For Passing
Press the accelerator as you would normally. When the
pedal is released, the vehicle will return to the set speed.
Using Electronic Speed Control On Hills
The transmission may downshift on hills t ...
Setting a speed
Once ACC has been put in standby mode, use
the or
buttons to store (set) the vehicle's
current speed. This puts the system in active
mode. The set speed, for example 55 mph, is
shown in th ...