Mercedes-Benz GLK-Class: Activating/deactivating the residual heat function
It is possible to make use of the residual heat of the engine to continue heating the stationary vehicle for up to 30 minutes after the engine has been switched off. The heating time depends on the temperature that has been set.
The blower will run at a low speed regardless of the airflow setting.
If you activate the residual heat function at high temperatures, only the ventilation will be activated. The blower runs at medium speed.
It is possible that the residual heat function may be activated automatically an hour after the SmartKey is removed. The vehicle is then ventilated for 30 minutes to dry the air-conditioning system.
- Turn the SmartKey to position 0 in the ignition lock or remove it.
- To activate: press the button. The indicator lamp in the button lights up.
- To switch off: press the button. The indicator lamp in the button goes out.
Residual heat is deactivated automatically:
- after about 30 minutes
- when the ignition is switched on
- if the battery voltage drops
- if the coolant temperature is too low
Activating/deactivating airrecirculation mode
You can deactivate the flow of fresh air if unpleasant odors are entering the vehicle from outside. The air already inside the vehicle will then be recirculated. WARNING Fogged windows impair ...See also:
Using the steering wheel audio switches
Some audio features can be controlled using the switches on the
steering wheel.
1 Volume
2 Radio mode: Select radio
stations
CD mode: Selects tracks
and files (MP3 and WMA)
iPod mode: Selects ...
Power steering
The power steering system operates only
when the engine is running.
If you lose power steering assist because
the engine stops or the system fails to
function, you can steer but it will take
...
Two-Wheel Drive (2WD) models
Two-Wheel Drive (2WD) models
NISSAN recommends that your vehicle be
towed with the driving (front) wheels off the
ground or place the vehicle on a flat bed truck as
illustrated.
- Never ...