Nissan Rogue: Locking doors - How to use remote keyless entry function - Intelligent Key system (if so equipped) - Pre-driving checks and adjustments - Nissan Rogue Owner's ManualNissan Rogue: Locking doors

1. Turn the ignition switch to the LOCK position.1

2. Carry the Intelligent Key with you.

3. Close all the doors.2

4. Push the LOCK the button 1 on the Intelligent Key.

5. All the doors and the lift gate will lock.

6. The hazard indicator flashes twice and the horn chirps once.

1: Doors will lock with the Intelligent Key while the ignition switch is in the ACC or ON position.

2: Doors will not lock with the Intelligent Key while any door is open.

Operate the door handles to confirm that the doors have been securely locked.

    How to use remote keyless entry function
    - Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufacturer for the possible influences before u ...

    Unlocking doors
    1. Push the UNLOCK button 2 on the Intelligent Key. 2. The hazard indicator flashes once. The driver’s door will unlock. 3. Push the UNLOCK button again within 5 seconds. 4. The hazar ...

    See also:

    Sport Utility Vehicle
    WARNING This Sport Utility Vehicle is designed for both on-road and off-road use. It can go places and perform tasks for which conventional 2-wheel drive passenger cars are not intended. Thi ...

    Maintenance
    The Service and Warranty Booklet describes all the necessary maintenance work which should be done at regular intervals. Always have the Service and Warranty Booklet with you when you bring the ve ...

    Rear Tail/Stop, Turn Signal, And Back-Up Lamp
    1. Open the liftgate. 2. Remove the screws that fasten the taillamp housing to the vehicle. 3. Pull the taillamp housing straight back to separate it from the vehicle. 4. Disconnect the elect ...