Volvo XC60: Keyless drive remote key and driver's seat/door 
mirror memory - Keyless drive (models with Personal Car 
Communicator only) - Keyless drive - Locks and alarm - Volvo XC60 Owner's ManualVolvo XC60: Keyless drive remote key and driver's seat/door mirror memory

• When you leave the vehicle with a PCC in your possession and lock any door, the position of the driver's seat and door mirrors will be stored in the seat's memory.

• The next time a door is opened by a person with the same PCC in his/her possession, the driver's seat and door mirrors will automatically move to the position that they were in when the door was most recently locked.

NOTE
If several people carrying PCCs approach the vehicle at the same time, the driver's seat and door mirrors will assume the positions they were in for the person who opens the driver's door.

See also page 85 for information on adjusting and storing the seat's position in the seat memory.

    Locking the vehicle
    Models with keyless drive have a button on the outside door handles The doors and the tailgate can be locked by pressing the lock button in any of the outside door handles. NOTE On keyless d ...

    Keyless drive information messages
    If all of the PCCs are removed from the vehicle while the engine is running or if the ignition is in mode II (see page 82) and all of the doors are closed, a message will appear in the instrumen ...

    See also:

    Engine Coolant
    Adding Engine Coolant If the coolant level in the reserve tank is at or below the MIN line, add coolant to bring it up to the MAX line. Inspect the cooling system for leaks. Always use Honda ...

    Tire rotation
    Models equipped with 4 non-unidirectional tires 1) Front Models equipped with unidirectional tires 1) Front Tire wear varies from wheel to wheel. To maximize the life of each tire and ensure ...

    Setting automatic connection of the device on or off
    If “BT Power” is set to on, the registered device will be connected automatically when the engine switch is turned to the “ACC” position. 1 Select “BT Power” using . 2 Select “ON” o ...