Mercedes-Benz GLK-Class: Instrument cluster - Settings menu - Menus and submenus - On-board computer and displays - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Instrument cluster

Selecting the unit of measurement for distance

The Display Unit Speed-/Odometer: function allows you to choose whether certain displays appear in kilometers or miles.

The selected unit of measurement for distance applies to:

  • the digital speedometer in the Trip menu
  • the odometer and the trip odometer
  • the trip computer
  • the current consumption and the range
  • the navigation instruction in the Navi menu
  • ASSYST PLUS service interval display

 

  • Press the button on the steering wheel to or select the Settings menu. button on the steering wheel to select the Settings menu.
  • Press the   button to select the Instr. or cluster submenu.  button to select the Instr. cluster submenu.
  • Press the Press the or button to confirm.
  • Press the button to select the Display Unit or Speed-/Odometer function. You will see the selected setting: km or miles. button to select the Display Unit Speed-/Odometer function. You will see the selected setting: km or miles.
  • Press the the setting. button to save the setting.

Selecting the permanent display function

The Permanent Display: function allows you to choose whether the multifunction display always shows the outside temperature or the speed in km/h (USA) or mph (Canada).

  • Press the button on the steering wheel to or select the Settings menu. button on the steering wheel to select the Settings menu.
  • Press the button to select the Instr. cluster or submenu. button to select the Instr. cluster submenu.
  • Press the Press the or button to confirm.
  • Press the button to select the Permanent or display function. You will see the selected setting Outside Temperature or Speedometer button to select the Permanent display function. You will see the selected setting Outside Temperature or Speedometer [km/h]:.
  • Press the the setting. button to save the setting.
    Introduction
    The Settings menu can be used for: changing the instrument cluster settings changing the time/date settings changing the light settings changing the vehicle settings changing the conveni ...

    Time/date
    This submenu is only available on vehicles with Audio 20. To set the time and the date for vehicles with COMAND, see the separate operating instructions. In the Time/date submenu, you can set the t ...

    See also:

    If your vehicle gets stuck
    If your vehicle gets stuck in mud or snow it may be rocked out by shifting between forward and reverse gears, stopping between shifts, in a steady pattern. Press lightly on the accelerator in each g ...

    Inflating tires
    The tire sealing system can be used to inflate the tires. To do so: 1. Park the car in a safe place. 2. The compressor should be switched off. Ensure that the on/off switch is in position 0 (th ...

    Sunroof
    On vehicles with a sunroof, the switches used to operate it are on the headliner above the rearview mirror. The ignition must be in ON/ RUN or ACC/ACCESSORY, or in Retained Accessory Power (RAP) t ...