Mercedes-Benz GLK-Class: Important safety notes - General driving tips - Driving tips - Driving and parking - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Important safety notes

WARNING WARNING

Always remember that you must concentrate primarily on driving the vehicle. The driver's concentration must always be directed primarily at road traffic. For your own safety and that of others, we recommend that you stop the vehicle at a safe place and in accordance with the traffic conditions before making or accepting a phone call.

Comply with all legal requirements if you use the telephone while driving. Use the handsfree system and only use the telephone when road, weather and traffic conditions permit. In some jurisdictions, it is forbidden for drivers to use mobile phones while driving.

Only operate the audio system or COMAND (Cockpit Management and Data System) in compliance with all legal requirements and when the road, weather and traffic conditions permit. You may otherwise not be able to observe the traffic conditions, endangering yourself and others.

Remember that your vehicle covers a distance of 44 feet (approximately 14 m) a second when it is traveling at only 30 mph (approximately 50 km/h).

    Drive sensibly – save fuel
    Observe the following tips to save fuel: The tires should always be inflated to the recommended tire pressure. Remove unnecessary loads. Remove roof racks when they are not needed. Warm up t ...

    See also:

    Adding Engine Oil
    Unscrew and remove the engine oil fill cap on top of the valve cover. Pour in the oil slowly and carefully you do not spill any. Clean up any spills immediately. Spilled oil could damage co ...

    When CD is in the player (type C and D)
    Each brief press of the button changes the modes in the following sequence. *: For type C audio, “BT-A” is displayed. When the CD mode is selected, the player will start playback. ...

    START
    The engine is started in this position. The starter cranks the engine to start it. When the key is released (after the engine has started), the key automatically returns to the “ON” positi ...