Toyota RAV4: If you have a flat tire (vehicles with run-flat tires) - Essential information - When trouble arises - Toyota RAV4 Owner's ManualToyota RAV4: If you have a flat tire (vehicles with run-flat tires)

Toyota RAV4 / Toyota RAV4 Owner's Manual / When trouble arises / Essential information / If you have a flat tire (vehicles with run-flat tires)

Take your vehicle to the nearest Toyota dealer or authorized tire dealer as soon as possible.

■ Run-flat tires (A “RFT” or “DSST” mark is molded on the sidewall)

You can continue driving a

You can continue driving a vehicle with run-flat tires even if any tire goes flat. It is possible to run for a maximum of 100 miles (160 km) at a speed below 55 mph (90 km/h) after the tire pressure warning light comes on.

■In some condition (such as at high temperatures)

You cannot continue driving for up to 100 miles (160 km).

■If you cannot distinguish between the standard tires and run-flat tires

Consult your Toyota dealer.

■For the detailed information on run-flat tires

See the tire warranty book.

NOTICE
■When replacing the tires
When removing or fitting the wheels, tires or the tire pressure warning valve and transmitter, contact your Toyota dealer as the tire pressure warning valve and transmitter may be damaged if not handled correctly.

■To avoid damaging the tire pressure warning valves and transmitters
Do not use liquid sealants on flat tires.

    Stowing the flat tire
    1 Remove any dirt or foreign matter from the disc wheel seat and the wheel contact surface. Vehicles with aluminum wheels and a steel wheel for the spare: Remove the plastic rings from the wh ...

    If the engine will not start
    If the engine will not start even though correct starting procedures are being followed or releasing the steering lock, consider each of the following points. ■ The engine will not start eve ...

    See also:

    Door locks
    Operating door locks from outside the vehicle • Turn the key toward rear of vehicle to unlock and toward front of vehicle to lock. • Turn the key toward front of vehicle to lock all doors. ...

    Initializing the registered data
    To initialize the registered data, perform the following procedure. 1. Select the “INITIALIZE” menu. 2. Select the “CONFIRM” menu. First “PLEASE WAIT”, then “INITIALIZED” is di ...

    Transfer Case Position Indicator Lights
    The four-wheel drive indicator lights (4WD, 4 LOW) are located in the instrument cluster. The NEUTRAL indicator light is located on the transfer case switch. If there is no indicator light on or ...