Subaru Forester: If the light illuminates steadily - CHECK ENGINE warning light/Malfunction indicator lamp - Warning and indicator lights - Keys and doors - Subaru Forester Owner's ManualSubaru Forester: If the light illuminates steadily

If the light illuminates steadily while driving or does not turn off after the engine starts, an emission control system malfunction has been detected.

You should have your vehicle checked by an authorized SUBARU dealer immediately.

NOTE
This light also illuminates when the fuel filler cap is not tightened until it clicks.

If you have recently refueled your vehicle, the cause of the CHECK ENGINE warning light/malfunction indicator lamp coming on could be a loose or missing fuel filler cap.

Remove the cap and retighten it until it clicks. Make sure nothing is interfering with the sealing of the cap. Tightening the cap will not make the CHECK ENGINE warning light turn off immediately. It may take several driving trips. If the light does not turn off, take your vehicle to your authorized SUBARU dealer immediately.

    CHECK ENGINE warning light/Malfunction indicator lamp
    If the CHECK ENGINE light illuminates while you are driving, have your vehicle checked/repaired by your SUBARU dealer as soon as possible. Continued vehicle operation without having ...

    If the light is blinking
    If the light is blinking while driving, an engine misfire condition has been detected which may damage the emission control system. To prevent serious damage to the emission control system, y ...

    See also:

    Shift lock release using the shift lock release button
    Perform the following procedure to release the shift lock. 1. Apply the parking brake and stop the engine. 2. Remove the shift lock cover using a flat-head screwdriver. The shift lock rele ...

    Starting Procedures
    Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. WARNING! • When leaving the vehicle, always remove the key fob from the ign ...

    Engine (ignition) switch (vehicles without smart key system)
    ■ Starting the engine 1 Check that the parking brake is set. 2 Check that the shift lever is set in P. 3 Sit in the driver’s seat and firmly depress the brake pedal. 4 Turn the engine swit ...