GMC Terrain: How to Check Lubricant - All-Wheel Drive - Vehicle Checks - Vehicle Care - GMC Terrain Owner's ManualGMC Terrain: How to Check Lubricant

To get an accurate reading, the vehicle should be on a level surface.

To get an accurate reading, the vehicle should be on a level surface.

If the level is below the bottom of the fill plug hole, located on the transfer case, the vehicle will need some lubricant added. Add enough lubricant to raise the level to the bottom of the fill plug hole. A fluid loss could indicate a problem; check and have it repaired, if needed.

What to Use

Refer to Recommended Fluids and Lubricants on page 11‑12 to determine what kind of lubricant to use.

    Transfer Case
    Refer to the Maintenance Schedule to determine how often to check the lubricant and when to change it. See Maintenance Schedule on page 11‑3. ...

    Starter Switch Check
    WARNING When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room aroun ...

    See also:

    Erasing HomeLink Buttons
    To erase programming from the three Home- Link buttons (individual buttons cannot be erased but can be “reprogrammed” as outlined below), follow the step noted: 1. Press and hold the two ou ...

    Cleaning the interior
    Only use cleaning agents and car care products recommended by Volvo. Clean regularly and follow the instructions included with the car care product. ...

    Replacing the battery
    - Do not let dust, oil or water get on or in the transmitter when replacing the battery. - Be careful not to damage the printed circuit board in the transmitter when replacing the battery ...