Mercedes-Benz GLK-Class: High-beam headlamps
- To switch on the high-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine.
- Turn the light switch to or or .
- Press the combination switch beyond the pressure point in the direction
of arrow 1.
In the or position, the highbeam headlamps are only switched on when it is dark and the engine is running. The indicator lamp in the instrument cluster lights up when the high-beam headlamps are switched on. - To switch off the high-beam headlamps: move the combination switch back to its normal position. The indicator lamp in the instrument cluster goes out.
Turn signals
High-beam headlamps ight turn signal High-beam flasher Left turn signal To indicate briefly: press the combination switch briefly to the pressure point in the direction of arrow 2 ...High-beam flasher
To switch on: turn the SmartKey in the ignition lock to position 1 or 2 or start the engine. Pull the combination switch in the direction of arrow 3. ...See also:
General Cleaning
Careful vacuuming of the top before washing is helpful
in removing dust and other foreign particles.
If Hand Washing:
• Wash in partial shade instead of direct sun.
• Wet the entire vehicle b ...
Road testing dynamometers (rolling roads)
It is essential that any dynamometer testing is
carried out only by a qualified person, familiar
with the dynamometer testing and safety
procedures practised by Dealers/
Authorised Repairers. ...
Hydroplaning
If water has accumulated to a certain depth on the road surface, there is a danger
of hydroplaning occurring, even if:
you drive at low speeds.
the tires have adequate tread depth.
For this ...