Mercedes-Benz GLK-Class: Hazard warning lamps - Exterior lighting - Lights and windshield wipers - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Hazard warning lamps

The hazard warning lamps automatically switch on if:

The hazard warning lamps automatically switch on if:

  • an air bag is deployed.
  • the vehicle is slowed down severely from a speed of over 45 mph(70 km/h) and comes to a halt.
  • To switch on the hazard warning lamps: press button 1.
    All turn signals flash. If you now switch on a turn signal using the combination switch, only the turn signal lamp on the corresponding side of the vehicle will flash.
  • To switch off the hazard warning lamps: press button 1.

The hazard warning lamps are deactivated automatically if the vehicle returns to a speed of over 6 mph(10 km/h) after a full application of the brakes.

Active light function The hazard warning lamps still operate if the ignition is switched off.

    High-beam flasher
    To switch on: turn the SmartKey in the ignition lock to position 1 or 2 or start the engine. Pull the combination switch in the direction of arrow 3. ...

    Active light function
    The active light function is a system that moves the headlamps according to the steering movements of the front wheels. In this way, relevant areas remain illuminated while driving. This allows ...

    See also:

    Owner maintenance
    Owner maintenance schedule The following lists are vehicle checks and inspections that should be performed by the owner or an Authorized Kia Dealer at the frequencies indicated to help ensure safe ...

    Starting on a steep uphill
    1 Firmly set the parking brake and shift the shift lever to D. 2 Gently depress the accelerator pedal. 3 Release the parking brake. ■Driving in the rain ●Drive carefully when it is rai ...

    Indicator and warning symbols
    Low oil pressure If the light comes on while driving, stop the vehicle, stop the engine immediately, and check the engine oil level. If the oil level is normal and the light stays on after ...