Mercedes-Benz GLK-Class: Low-beam headlamps
- To switch on the low-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine.
- Turn the light switch to . The indicator lamp in the instrument cluster lights up.
Operation
Depending on the date of manufacture of your vehicle, the or symbol for the automatic headlamp mode/daytime running lamps is located on the light switch. Illustration: light switch with the ...Daytime running lamps
Daytime running lamps in Canada The daytime running lamps function is required by law in Canada. It cannot therefore be deactivated. Turn the light switch to or . With the engine running: d ...See also:
Opening and closing the hood
1 Pull the lever located under the left side of
the dash to release the hood lock. An information
symbol will illuminate when the
hood is open.
2 Lift the hood slightly. Press the release
c ...
Sensor care
When washing the vehicle do
not aim
high pressure water jets directly at the
sensors. Do not use abrasive materials
or hard/sharp objects to clean the
sensors. Only use approved vehicle
shampo ...
Power brakes function only when the engine is running
The power brakes utilize vacuum pressure
which is only created when the engine is running.
Never let the vehicle roll to a stop with the
engine switched off.
If the power brakes are not working, ...