Volvo XC60: From outside the vehicle - Locking and unlocking the vehicle - Locks - Locks and alarm - Volvo XC60 Owner's ManualVolvo XC60: From outside the vehicle

The remote key locks and unlocks all of the doors and the tailgate.

Before the vehicle can be locked from the outside with the remote key, the driver's door must be closed. Any other door/tailgate that is open will be locked and the alarm will be armed.

NOTE
Be sure the remote key is outside of the vehicle before the other doors/tailgate are closed to help avoid locking the remote inside the vehicle.

If the vehicle is equipped with the optional keyless drive system, all doors/tailgate must be closed before the vehicle can be locked.

The first press on the unlock button unlocks the driver's door and a second press unlocks the other doors and the tailgate (see also page 58). This setting can be changed in the menu system, see page 134.

If the locks repeatedly do not react when the unlock button is pressed, it may be necessary to replace the batteries in the remote, see page 58. In this case the vehicle can be unlocked with the detachable key blade. See page 61.

    From inside the vehicle (central locking button)
    Central locking button The lock buttons on the door panel can be used to lock or unlock all doors and the tailgate at the same time. Press to lock and to unlock. Unlocking The vehicle ca ...

    See also:

    HomeLink® (if equipped)
    HomeLink® (if equipped) HomeLink® and the HomeLink® house are registered trademarks of Johnson Controls, Inc. The HomeLink® Wireless Control System provides a convenient way to replace up ...

    Driving on snow or ice
    - Wet ice (328F, 08C and freezing rain), very cold snow or ice can be slick and very hard to drive on. The vehicle will have much less traction or “grip” under these conditions. Try ...

    Compass zone adjustment
    1. Determine which magnetic zone you are in for your geographic location by referring to the zone map. 2. Turn ignition to the on position. 3. Start the engine. 4. Press the SETUP control to s ...