Mitsubishi Outlander: For cold and snow weather
Ventilation slots
The ventilation slots in front of the windscreen should be brushed clear after heavy snowfall so that the operation of the heating and ventilation systems will not be impaired.
Weatherstripping
To prevent freezing of the weatherstripping on the doors, bonnet, etc., they should be treated with silicone grease.
Additional equipment
It is a good idea to carry a shovel or a short-handled spade in the vehicle during the winter so that you can clear away snow if you get stranded. A small hand-brush for sweeping snow off the vehicle and a plastic scraper for the windscreen and rear window are also useful.
General maintenance
Fuel, engine coolant, oil and exhaust gas leakage
Look under the body of your vehicle to check for fuel, engine coolant, oil and
exhaust gas leaks.
WARNING:
● If you see a suspicious fuel ...
Fusible links
The fusible links will melt to prevent a fire if a large current attempts to
flow through certain electrical systems. In case of a melted fuse link, we recommend
you to have your vehicle inspected ...
See also:
Turbo models
Turbo models
1) Power steering oil pump pulley
2) Front side belt
3) Alternator pulley
4) Air conditioner compressor pulley
5) Rear side belt
6) Crank pulley
A) 22 lbf (98 N, 10 kgf)
...
Rear fog light
The rear fog light (located on the driver's side
of the vehicle) can be reached from behind the
bumper
1. Remove the bulb holder by turning it counterclockwise.
2. Remove the burned out bulb ...
How the System Works
The LDW camera sensor is on the windshield ahead of the rearview mirror.
To turn LDW on and off, press the LANE DEPART control on the steering wheel.
The control indicator will light when LDW is ...
