Mercedes-Benz GLK-Class: Emergency call
Important safety notes
A license agreement must exist in order to activate the mbrace service. Ensure that your system is activated and ready for use, and press the MB Info call button to register. If any of the steps mentioned is not carried out, the system may not be activated.
If you have questions about the activation, contact one of the following telephone assistance services:
USA: Mercedes-Benz Customer Assistance Center under
1-800-FOR-MERCedes (1-800-367-6372) or 1-888-990-9007
Canada: Customer Service at 1-888-923-8367
An emergency call is dialed automatically if an air bag or Emergency Tensioning Device is triggered.
An mbrace emergency call that has been initiated automatically cannot be terminated by the customer.
An emergency call can also be initiated manually.
As soon as the emergency call has been initiated, the indicator lamp in the SOS button flashes. The Connecting Call message appears on the multifunction display. The audio output is muted.
Once a connection has been established, the Call Connected message appears in the multifunction display.
All important information on the emergency is transmitted, for example:
- current location of the vehicle (as determined by the GPS system)
- vehicle identification number
- information on the type of emergency Shortly after the emergency call has been initiated, a voice connection is automatically established between the Mercedes-Benz Customer Assistance Center and the vehicle occupants. If the vehicle occupants respond, the Mercedes-Benz Customer Assistance Center attempts to get more information on the emergency.
If no vehicle occupant answers, an ambulance is immediately sent to the vehicle.
WARNING
If the indicator lamp in the SOS button is flashing continuously and no voice connection to the Mercedes-Benz Customer Assistance Center was established, then the mbrace system could not initiate an emergency call (e.g. the relevant cellular phone network is not available).
The message Call Failed appears in the multifunction display for approximately 10 seconds.
Should this occur, assistance must be summoned by other means.
Making an emergency call
- To initiate an emergency call manually: press cover 1 briefly to open it.
- Press SOS button 2 briefly. The indicator lamp in SOS button 2 flashes until the emergency call is concluded.
- Wait for a voice connection to the Mercedes-Benz Customer Assistance Center.
- After the emergency call is ended, close cover 1.
WARNING
If you feel in any way in jeopardy when in the vehicle (e.g. smoke or fire in the vehicle, vehicle in a dangerous road location), please do not wait for voice contact after you have pressed the SOS button. Carefully leave the vehicle and move to a safe location. The Mercedes-Benz Customer Assistance Center will automatically contact local emergency officials with the vehicle's approximate location if they receive an automatic SOS signal and cannot make voice contact with the vehicle occupants.
System self-test
After you have switched on the ignition, the system carries out a self-diagnosis. WARNING A malfunction in the system has been detected if one of the following conditions occurs: the indi ...Roadside Assistance button
X Press and hold Roadside Assistance button 1 for more than two seconds. This initiates a call to the Mercedes-Benz Customer Assistance Center. The indicator lamp in Roadside Assistance button 1 ...See also:
Heating and defrosting
Heating and defrosting
To direct warm air toward the floor and the
windshield:
1. Set the airflow control dial to the “”
position.
2. Set the temperature control dial to the
most com ...
Changing the Volume
1. Start a dialogue by pressing the Voice Command
button.
2. Say a command (e.g., “Help”).
3. Use the ON/OFF VOLUME rotary knob to adjust the
volume to a comfortable level while the Voice ...
Settings - options
- If the Link DAB setting is switched on and
the signal strength for a channel falls below
an acceptable level, the audio unit will
automatically search other available
ensembles for a channel wit ...