Subaru Forester: Dome light
Type A
Type B
1) ON
2) DOOR
3) OFF
The dome light switch has the following three positions.
ON: The light remains on continuously.
OFF: The light remains off.
DOOR: The dome light illuminates automatically in the following cases.
- Any of the doors or the rear gate is opened.
- The doors or the rear gate are unlocked using the remote keyless entry transmitter.
- The ignition switch is turned from the “Acc” position to the “LOCK” position.
The automatically illuminated dome light remains on for several seconds and then gradually turns off after all doors and the rear gate are closed.
While the light is illuminated, if any of the following operations are performed, the dome light turns off immediately.
- The ignition switch is turned from the “LOCK” position to the “Acc” or “ON” position.
- All doors and the rear gate are locked using the remote keyless entry transmitter.
The setting of the period for which the light remains on (OFF delay timer) can be changed as follows.
- Models with genuine SUBARU navigation system:
The setting can be changed using the navigation monitor. For details, please refer to the Owner’s Manual supplement for the navigation system. Also, the setting can be changed by a SUBARU dealer.
Contact your SUBARU dealer for details.
- Models without genuine SUBARU navigation system:
The setting can be changed by a SUBARU dealer. Contact your SUBARU dealer for details.
Interior lights
When leaving your vehicle, make sure the
lights are turned off to avoid battery
discharge. ...
Cargo area light
Cargo area light
1) DOOR
2) OFF
3) ON
The cargo area light switch has the
following positions.
DOOR: The light illuminates when the rear
gate is opened. The light remains illuminated
...
See also:
Exterior mirrors
Exterior mirrors
1. Mirror selector switches. Press to select
the left or right mirror.
2. Mirror adjustment switch. Move
up/down/left or right to adjust the mirror
glass.
3. Press both select ...
To increase the speed (by accelerator pedal)
1. Depress the accelerator pedal to
accelerate the vehicle to the desired
speed.
2. Push the “SET/COAST” button once.
Now the desired speed is set and the
vehicle will keep running at that ...
Shift lock release
If the select lever cannot be operated, turn
the ignition switch back to the “ON”
position then move the select lever to the
“P” position with the brake pedal depressed.
If the select l ...
