Mercedes-Benz GLK-Class: Cleaning the seat covers - Interior care - Care - Maintenance and care - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Cleaning the seat covers

Alcantara® covers. If used often, these can damage the cover. Do not use microfiber cloths to clean genuine leather, artificial leather or Alcantara® covers. If used often, these can damage the cover.

Observe the following when cleaning:

  • clean genuine leather covers carefully with a damp cloth and then wipe the covers down with a dry cloth. Make sure that the leather does not become soaked. It may otherwise become rough and cracked. Only use leather care agents that have been tested and approved by Mercedes-Benz. You can obtain these from a qualified specialist workshop, e.g. a Mercedes-Benz Service center.
  • clean artificial leather covers with a cloth moistened with a solution containing 1% detergent (e.g. dish washing liquid).
  • clean cloth covers with a microfiber cloth moistened with a solution containing 1% detergent (e.g. dish washing liquid). Rub carefully and always wipe entire seat sections to avoid leaving visible lines. Leave the seat to dry afterwards. Cleaning results depend on the type of dirt and how long it has been there.
  • clean Alcantara® covers with a damp cloth. Make sure you wipe entire seat sections to avoid leaving visible lines.

of the covers is retained over time. Note that regular care is essential to ensure that the appearance and comfort of the covers is retained over time.

    Cleaning genuine wood and trim elements
    Wipe the wooden trim and trim pieces with a damp, lint-free cloth, e.g. a microfiber cloth. Heavy soiling: use car care and cleaning products recommended and approved by Mercedes-Benz. ...

    Cleaning the seat belts
    Use clean, lukewarm water and soap solution. Do not clean the seat belts using chemical cleaning agents. Do not dry the seat belts by warming them above 176 ‡ (80 †) or placing them in ...

    See also:

    Tire Pressure Light
    For vehicles with the Tire Pressure Monitor System (TPMS), this light comes on briefly when the engine is started. It provides information about tire pressures and the TPMS. When the Light Is O ...

    Opening the remote key/PCC
    1 1 Slide the spring loaded catch to the side. 2 Pull the key blade straight out of the remote key. 2 3 Insert a small screwdriver in the hole behind the spring loaded catch and carefully pr ...

    Jack Location
    The scissor-type jack and tire changing tools are located in the cargo compartment behind a trim cover on the left rear trim panel. The latch is located at the bottom of the trim cover. Jack ...