Mercedes-Benz GLK-Class: Changing the settings of the locking system
You can change the setting of the locking system in such a way that only the driver's door and the fuel filler flap are unlocked. This is useful if you frequently travel on your own.
- To change the setting: press and hold down the
and
buttons simultaneously for approximately six seconds until the battery check lamp () flashes twice.
If the setting of the locking system is changed within the signal range of
the vehicle, pressing the
or
button locks or unlocks the vehicle.
The SmartKey now functions as follows:
- To unlock the driver's door: press the
button once.
- To unlock centrally: press the
button twice.
- To lock centrally: press the
button.
The KEYLESS-GO function is changed as follows:
- To unlock the driver's door: touch the inner surface of the door handle on the driver's door.
- To unlock centrally: touch the inner surface of the door handle on the frontpassenger door or the rear door.
- To lock centrally: touch the outer sensor surface on one of the door handles.
Important notes on the use of KEYLESSGO
The KEYLESS-GO key can be used like a conventional key.
You can combine KEYLESS-GO functions with those of a conventional key,
e.g. unlock with KEYLESS-GO and lock with the
button.
Always ...
Restoring the factory settings
Press the and
buttons simultaneously for approximately
six seconds until the battery check lamp flashes twice.
...
See also:
Telephone compatibility
Please refer to the Ownership section of the
Land Rover website at www.landrover.com,
for a list of compatible phones.
Note: The Bluetooth® equipped phones listed
on Landrover.com, have been test ...
Liftgate Flipper Glass
The liftgate flipper glass is also unlocked when the
liftgate is unlocked. To open the flipper glass, push up on
the window switch located on the liftgate.
Liftgate Flipper Glass Release
NOTE: ...
Floor mat
Floor mat
Retaining pins are located on the driver’s
side floor.
The floor mat is secured using the built-in
grommets, by placing the grommets over
the pins and pushing them downward.
...