Nissan Rogue: Changing engine oil and filter
Change the engine oil and filter according to the maintenance log shown in the NISSAN Service and Maintenance Guide.
Checking engine oil level
1. Park the vehicle on a level surface and apply the parking brake. 2. Run the engine until it reaches operating temperature. 3. Turn off the engine. Wait more than 10 minutes for the oil to ...Vehicle set-up
1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature. 3. Turn the engine off and wait more than 10 min ...See also:
Warranty
The Service and Warranty Information booklet contains detailed information about
the warranties covering your vehicle.
Your authorized Mercedes-Benz Center will exchange or repair any defective par ...
Steps for Determining Correct Load Limit
1. Locate the statement "the combined
weight of occupants and cargo should
never exceed XXX pounds" on your vehicle's
placard.
2. Determine the combined weight of the
driver and pas ...
Safety belt extension assembly
If the safety belt is too short when fully extended, a safety belt extension
assembly can be obtained from an authorized dealer.
Use only extensions manufactured by the same supplier as the safety ...