Volvo XC60: Cargo area lighting - Replacing bulbs - Maintenance and specifications - Volvo XC60 Owner's ManualVolvo XC60: Cargo area lighting

NOTE

NOTE
Before starting to replace a bulb, see page 322.

1. Insert a screwdriver and gently turn so that the bulb housing comes loose.

2. Replace the bulb.

3. Check that the bulb illuminates and press it back into the bulb housing.

    License plate lighting
    1. Remove the screws with a screwdriver. 2. Carefully detach the entire bulb housing and pull it out. 3. Replace the bulb. 4. Reinsert the entire bulb housing and tighten the screws. ...

    Vanity mirror lighting
    Removing the mirror glass 1. Insert a screwdriver underneath the lower edge, in the center, turn and carefully pry up the lug on the edge. 2. Carefully detach and lift out the entire mirror ...

    See also:

    DOOR position
    When the switch is in the DOOR position 2 the map lights will illuminate under the following conditions: - ignition switch is turned to the LOCK position — remain on for about 15 seconds. ...

    To Change or Select Tracks/Files
    You can use the preset buttons while a disc is playing to select passages and change tracks (files inMP3 or WMA mode). Each preset button’s function is shown on the bottom of the scree ...

    Tire Spinning
    When stuck in mud, sand, snow, or ice conditions, do not spin your vehicle’s wheels above 30 mph (48 km/h). WARNING! Fast spinning tires can be dangerous. Forces generated by excessive wheel ...