Nissan Rogue: Capacities and recommended fuel/lubricants
1: For additional information, see “Engine oil” in the “8. Maintenance and do-it-yourself” section for changing engine oil.
2: For additional information, see “Engine oil and oil filter recommendation” later in this section.
3: Use only Genuine NISSAN CVT Fluid NS-2. Using transmission fluid other than Genuine NISSAN CVT Fluid NS-2 will damage the CVT, which is not covered by the NISSAN new vehicle limited warranty.
4: For hot climates, viscosity SAE 90 is suitable for ambient temperatures above 328F (08C).
5: Available in mainland U.S.A. through a NISSAN dealer.
6: For additional information, see “Vehicle identification” later in this section for air conditioner specification label.
- Fuel recommendation
- Engine oil and oil filter recommendation
- Air conditioning system refrigerant and lubricant recommendations
Fuel recommendation
Use unleaded regular gasoline with an octane
rating of at least 87 AKI (Anti-Knock Index)
number (Research octane number 91).
- Using a fuel other than that specified
could adversely affect ...
See also:
Tire Identification Number (TIN)
Tire Identification Number (TIN) is
marked on the intended outboard
sidewall. The TIN is composed of
four groups. Here is a brief review
of the TIN with a breakdown of its
individual element ...
Rear-facing child restraint installation using the
seat belts
The three-point seat belt with Automatic
Locking Retractor (ALR) must be
used when installing a child restraint.
Failure to use the ALR mode will result
in the child restraint not being p ...
Screensaver (type D audio)
If the following operations are not performed
for more than 30 seconds while
the audio is ON, the screensaver will be
displayed.
- Operate any button or dial
- Shift the shift lever/select le ...
