Volvo XC60: Brake lights and taillights
The brake lights and taillights are replaced from inside the cargo area.
NOTE
Before starting to replace a bulb, see
page 322.
1. Open the panel.
2. Remove the bulb holder by turning it counterclockwise.
3. Remove the burned out bulb by pressing it in and turning it counterclockwise.
4. Insert a new bulb, press it in and turn it clockwise.
5. Reinsert the bulb holder and turn it clockwise.
Location of taillight bulbs
Taillight lens, right side
1 Parking/side marker lights (LED)
2 Side reflector
3 Brake light
4 Backup light
5 Turn signal
6 Brake lights (LED)
NOTE
If an error message remains in the display ...
License plate lighting
1. Remove the screws with a screwdriver.
2. Carefully detach the entire bulb housing
and pull it out.
3. Replace the bulb.
4. Reinsert the entire bulb housing and
tighten the screws. ...
See also:
Determining compatibility of tire and vehicle load capacities
The sum of four tires’ maximum
load ratings must exceed the maximum
loaded vehicle weight
(“GVWR”). In addition, sum of the
maximum load ratings of two front
tires and of two rear tire ...
Transmission code designations
You can find a transmission code on
the Safety Compliance Certification
Label. The following table tells you
which transmission each code
represents.
...
Bluetooth® version
For information about the Bluetooth® version
installed in the vehicle, go to Phone menu
Phone settings
Bluetooth software
version in car. ...