GMC Terrain: Automatic Operation
The system automatically controls the fan speed, air delivery, air conditioning, and recirculation to heat or cool the vehicle to the selected temperature.
When the AUTO indicator light is on, the system is in full automatic operation.
To place the system in automatic mode:
1. Press AUTO.
2. Set the temperature. Allow the system time to stabilize. Then adjust the temperature as needed.
To improve fuel efficiency and to cool the vehicle faster, recirculation may be automatically selected in warm weather. The recirculation light will not come on. Press the to select recirculation; press it again to select outside air.
Automatic Climate Control System
The vehicle's heating, cooling, defrosting, and ventilation can be controlled with this system. A. Fan Control B. AUTO (Automatic Operation) C. Air Delivery Mode Controls D. Front Defrost ...Manual Operation
(Power): Press to turn the climate control system on or off. (Fan Control): Turn to increase or decrease the fan speed. Adjusting the fan speed while in automatic mode places the fan under ma ...See also:
Engine Coolant Level
The coolant bottle provides a quick visual method for
determining that the coolant level is adequate. With the
engine idling, and warm to normal operating temperature,
the level of the engine co ...
Defogging the windshield
Press .
Air flows to the windshield and
side windows.
The air conditioning system operates
automatically.
Recirculated air mode will automatically
switched to outside air
mode. It is not poss ...
Stopping the engine
The ignition switch should be turned off
only when the vehicle is stopped and the
engine is idling.
Do not stop the engine when the
vehicle is moving. This will cause
loss of power to the ...