Jeep Liberty: Answer Or Reject An Incoming Call — No Call Currently In Progress
When you receive a call on your mobile phone, the
Uconnect™ Phone will interrupt the vehicle audio system,
if on, and will ask if you would like to answer the
call. Press the 
button to accept
the call. To reject the
call, press and hold the button
until you hear a single
beep, indicating that the incoming call was rejected.
Phone Call Features
The following features can be accessed through the
Uconnect™ Phone if the feature(s) are available on your
mobile service plan. For example, if your mobile service
plan provides three-way call ...
Answer Or Reject An Incoming Call — Call Currently In Progress
If a call is currently in progress and you have another
incoming call, you will hear the same network tones for
call waiting that you normally hear when using your
mobile phone. Press the butto ...
See also:
Four-wheel drive lock switch (4WD models)
Four-wheel drive lock mode can be used when a large amount of
drive power needs to be applied to all the wheels, such as when the
vehicle gets stuck in mud and you need to free it.
Press the swit ...
When to Check Power Steering Fluid
The power steering fluid does not need to be checked unless there is a leak in
the system or you hear an unusual noise. Have the system inspected and repaired
if there is a fluid loss. ...
Oil Change Required
Your vehicle is equipped with an engine oil change
indicator system. The “Oil Change Required” message
will flash in the EVIC display for approximately 10 seconds
after a single chime has so ...
