Mercedes-Benz GLK-Class: Activating
- To open the tailgate: pull the handle on the tailgate.
- To stop the opening procedure at the desired position: press the closing button () in the tailgate or pull the handle on the outside of the tailgate again.
- To store the position: press and hold the closing button in the tailgate until you hear a short tone.
The opening angle limiter is activated. The tailgate will now stop in the stored position when opening.
If you wish to open the tailgate fully, pull the handle of the tailgate again after it has stopped automatically. This does not delete the stored position.
Important safety notes
You can limit the opening angle of the tailgate. This is possible in the top half of its opening range, up to approximately 8 in (20 cm) before the stop. Limiting the opening angle can be useful if ...Deactivating
Press and hold the closing button () in the tailgate until you hear two short tones. ...See also:
Calling up a stored setting
If you want to move the seat from the fully reclined position to a stored seat
position, first raise the backrest. The seat could otherwise be damaged.
Press and hold the relevant storage positi ...
Bulb Replacement
WARNING:
• Light bulbs can be hot enough to burn your finger right after being turned off.
This is true especially for halogen headlight bulbs. Replace the bulbs after they
become cool enough ...
Vehicle Dynamic Control (VDC) system
The Vehicle Dynamic Control (VDC) system
uses various sensors to monitor driver inputs
and vehicle motion. Under certain driving conditions,
the VDC system helps to perform the
following funct ...