Subaru Forester: Top tether anchorages
Your vehicle is equipped with three top tether anchorages so that a child restraint system having a top tether can be installed in the rear seat. When installing a child restraint system using top tether, proceed as follows, while observing the instructions by the child restraint system manufacturer.
Since a top tether can provide additional stability by offering another connection between a child restraint system and the vehicle, we recommend that you use a top tether whenever one is required or available.
Installation of child restraint systems by use of
lower and tether anchorages (LATCH)
- Child restraint systems and seatbelts
can become hot in a vehicle
that has been closed up in sunny
weather; they could burn a small
child. Check the child restraint
system before you p ...
Anchorage location
1) For right seat
2) For center seat
3) For left seat
There is an anchorage located on the rear
edge of the ceiling above each seating
position. ...
See also:
Neutral position (N)
No gear is engaged and the engine can be
started with the gear selector in this position.
Apply the parking brake if the vehicle is stationary
with the gear selector in position N. ...
Rear fog lamp
To switch on the rear fog lamp: turn the SmartKey in the ignition lock
to position 2 or start the engine.
Turn the light switch to
or or
.
If the light switch is set to or
, the re ...
Keyless entry system*
Press the remote control switch, and all doors and the tailgate will be locked
or unlocked as desired. It is also possible to operate the door mirrors, electric
window.
1- LOCK switch. 2- UNLOC ...
