Subaru Forester: To install the cover housing - Cargo area cover (dealer option) - Interior equipment - Subaru Forester Owner's ManualSubaru Forester: To install the cover housing

1. Remove the cover of the retainers by

1. Remove the cover of the retainers by prying on the edge with a flat-head screwdriver.

2. Insert the projections located on the

2. Insert the projections located on the both ends of the sleeve into the recesses of the retainers.

    To remove the cover
    1. Rewind the cover. 2. Push the switch that is next to the right end of the cover housing. 3. Take it off the retainer. ...

    Cargo tie-down hooks
    Cargo tie-down hooks The cargo area is equipped with four tiedown hooks so that cargo can be secured with a cargo net or ropes. When using the tie-down hooks, turn them down out of the sto ...

    See also:

    SRS airbags
    The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the ...

    System operation
    The alarm system will give the following alarms when triggered. - The vehicle’s horn will sound for 30 seconds. - The turn signal lights will flash for 30 seconds. If any of the doors or th ...

    Locking doors
    1. Turn the ignition switch to the LOCK position.1 2. Carry the Intelligent Key with you. 3. Close all the doors.2 4. Push the door handle request switch (driver’s or front passenger’s) A or ...