Volvo XC60: Remote keyless entry system and the driver's seat and door mirrors
Remote keyless entry system and the driver's seat and door mirrors
The remote control transmitter also controls the position of the power driver's seat and door mirrors in the following way:
1. Adjust the seat to your preferences.
2. When you leave your vehicle, lock it using the remote control.
The position of the driver's seat and door mirrors is now stored in the remote control's memory.
Automatic seat/mirror adjustment
To move the seat and door mirrors to the position in which you left them:
1. Unlock the driver's door with the same remote control (the one used to lock the doors).
2. Open the driver's door within 2 minutes.
The driver's seat and door mirrors will automatically move to the position in which you left them.
NOTE
• The key memory is independent of the
seat memory.
• The seat will move to this position even
if someone else has moved it to a different
seating position and locked the
vehicle with a different remote control.
• This feature will work in the same way
with all of the remote control transmitters
that you use with your vehicle.
The function can be activated/deactivated under MY CAR under Settings Car settings Car key memory Position of door mirrors and driver's seat in key. See page 133 for a description of the menu system.
Seat with memory function
Seat with memory function 1 Stored seat position 2 Stored seat position 3 Stored seat position 4 Memory button Programming the memory Three different seating and door mirror positions can be ...Emergency stop
If the seat accidentally begins to move, press one of the buttons to stop the seat. WARNING • Because the driver's seat can be adjusted with the ignition off, children should never be left u ...See also:
Glass surfaces
Clean the rear window with a soft cloth to avoid
damaging the heating element. Do not scrape
the glass or use any abrasive cleaning fluid.
Mirror glass is particularly susceptible to
damage. Wash ...
Replacing headlamp bulbs
1. Make sure the headlamp control is in the off position.
2. Open the hood.
3. Reach over the front bolster.
4. Remove the bulb by turning it
counterclockwise and then pulling it
straight out.
...
Fluids
NOTE
Each quantity indicated here is only a guideline. The necessary quantity for
replacement may differ slightly depending on the
temperature and other factors.
For the checking procedure, o ...