Ford Escape: Rear window wiper/washer controls
For rear wiper operation, rotate the rear window wiper and washer control to the desired position.
Select:
2 — Normal speed operation of rear
wiper.
1 — Intermittent operation of rear
wiper.
O (off) — Rear wiper and washer off.
For rear wash cycle, rotate (and hold as desired) the rear wiper/washer
control to either 
position.
From either position, the control will automatically return to the 2 or O (off) position.
Windshield wiper rainlamp feature (if equipped with autolamp)
When the windshield wipers are turned on during daylight, and the
headlamp control is in the autolamp position, the exterior lamps will turn
on after a brief delay and will remain on until the wiper ...
Tilt steering Wheel
To adjust the steering wheel:
1. Pull down the steering column tilt
lever.
2. Move the steering wheel up or
down until you find the desired
location.
3. Push the steering column tilt
lever ...
See also:
Windshield wipers/washers
Windshield wipers and washers
1 Rain sensor* on/off
2 Thumb wheel sensitivity/frequency
CAUTION
• Use ample washer fluid when washing
the windshield. The windshield should
be thoroughly w ...
Symbols and messages in the display
When City Safetyâ„¢ automatically applies the
brakes, one or more of the symbols in the main
instrument panel may illuminate and its associated
message will be displayed.
A text message can be ...
Sensor blockage
If one of the sensors is completely obscured
the BSM system is automatically disabled, the
warning indicator dot is displayed in the
exterior mirror and the message BSM sensor
blocked appears in t ...
