Mercedes-Benz GLK-Class: Opening and closing
Overhead control panel
- To open
- To open
- To close
- Turn the SmartKey to position 1 or 2 in the ignition lock.
- Press or pull the
switch
in the corresponding direction.
If you press the switch beyond
the point of resistance, an automatic opening/ closing process is started in the
corresponding direction. You can stop automatic operation by operating the switch
again.
General notes
The roller sunblinds shield the vehicle interior from sunlight. The two roller
sunblinds can only be opened and closed together when the panorama roof with power
tilt/sliding panel is closed.
...
Resetting the panorama roof with power tilt/sliding panel and the roller sunblinds
Reset the panorama roof with power tilt/ sliding panel and the roller sunblinds
if the panorama roof with power tilt/sliding panel or the roller sunblinds do not
move smoothly.
Turn the SmartK ...
See also:
Refrigerant for your climate control system
Your air conditioner uses ozone friendly
refrigerant HFC134a. Therefore, the method
of adding, changing or checking the
refrigerant is different from the method for
CFC12 (freon). Consult your ...
Engine coolant
The coolant level is satisfactory if it is between the “FULL” and “LOW”
lines on the reservoir when the engine is cold.
1 Reservoir cap
2 “FULL”
3 “LOW”
If the level is on or be ...
Rolling code programming
Note: Programming the rolling code garage door opener involves
time-sensitive actions. Read the entire procedure prior to beginning so
you will know which actions are time-sensitive. If you do not f ...
