Mercedes-Benz GLK-Class: Lights
Switching the daytime running lamps on/ off
This function is not available in Canada. If you have activated the Daytime Running Lights: function and the light switch is in the c or à position, the daytime running lamps are switched on automatically during the day when the engine is running. In the dark, the following also light up:
- the low-beam headlamps
- the parking lamps
- the tail lamps
- the license plate lamp
- the side marker lamps
- Press the or button on the steering wheel to select the Settings menu.
- Press the or button to select the Lights submenu.
- Press the button to confirm.
- Press the or button to select the Daytime Running Lights: function. You will see the selected setting: Enabled or Disabled.
- Press the button to save the setting.
Activating/deactivating surround lighting and exterior lighting delayed switch-off
If you have activated the Lighting: function and the light switch is in the or position, the following functions are active when it is dark:
- Surround lighting: the exterior lighting remains lit for 40 seconds after unlocking with the key. The exterior lighting switches off when you open the driver's door.
- Exterior lighting delayed switch-off: the exterior lighting remains lit for 60 seconds after the engine has been switched off. If you close all the doors, the exterior lighting goes off after 15 seconds.
If you activate the Lighting: function, the following light up depending on the vehicle's equipment:
- the parking lamps
- the fog lamps
- the low-beam headlamps
- the daytime running lamps
- the side marker lamps
- Press the or button on the steering wheel to select the Settings menu.
- Press the or button to select the Lights submenu.
- Press the a button to confirm.
- Press the or button to select the Locator Lighting: function. You will see the selected setting: Enabled or Disabled.
- Press the button to save the setting. Deactivating delayed switch-off of the exterior lighting temporarily:
- Before leaving the vehicle, turn the SmartKey to position 0 in the ignition lock.
- Turn the SmartKey to position 2 in the ignition lock and back to position 0. The exterior lighting delayed switch-off is deactivated.
Delayed switch-off of the exterior lighting is reactivated the next time you start the engine.
Activating/deactivating the interior lighting delayed switch-off
If you activate the Interior Lighting Delay function, the interior lighting remains on for 20 seconds after you remove the SmartKey from the ignition lock.
- Press the or button on the steering wheel to select the Settings menu.
- Press the or button to select the Lights submenu.
- Press the button to confirm.
- Press the or button to select the Interior Lighting Delay: function. You will see the selected setting: Enabled or Disabled.
- Press the button to save the setting.
Time/date
This submenu is only available on vehicles with Audio 20. To set the time and the date for vehicles with COMAND, see the separate operating instructions. In the Time/date submenu, you can set the t ...Vehicle
Activating/deactivating the automatic door locking feature If you select the Automatic Door Lock: function, the vehicle is centrally locked above a speed of around 9 mph (15 km/h). For further ...See also:
Temporary spare tire (if equipped)
When a spare tire is mounted or a
wheel rim is replaced without the
original pressure sensor/transmitter
being transferred, the low tire pressure
warning light will illuminate
steadily a ...
Types of garage door openers (rolling code and fixed code)
The Car2U Home Automation System may be programmed to operate
rolling code and fixed code garage door openers.
• Rolling code garage door openers were produced after 1996 and are
code protected. ...
Disconnecting a USB Flash Memory Device
You can disconnect the USB flash
memory device at any time even if
the USB mode is selected on the
audio system. Always follow the USB
flash memory device’s instructions
when you remove it ...