Volvo XC60: License plate lighting - Replacing bulbs - Maintenance and specifications - Volvo XC60 Owner's ManualVolvo XC60: License plate lighting

1. Remove the screws with a screwdriver.

1. Remove the screws with a screwdriver.

2. Carefully detach the entire bulb housing and pull it out.

3. Replace the bulb.

4. Reinsert the entire bulb housing and tighten the screws.

    Brake lights and taillights
    The brake lights and taillights are replaced from inside the cargo area. NOTE Before starting to replace a bulb, see page 322. 1. Open the panel. 2. Remove the bulb holder by turning it coun ...

    Cargo area lighting
    NOTE Before starting to replace a bulb, see page 322. 1. Insert a screwdriver and gently turn so that the bulb housing comes loose. 2. Replace the bulb. 3. Check that the bulb illuminates an ...

    See also:

    Power Door Locks
    To lock all doors and the tailgate, push the top of the master door lock switch on either front door, pull the lock tab rearward on the driver’s door, or use the key on the outside loc ...

    If a warning light turns on or a warning buzzer sounds...
    Calmly perform the following actions if any of the warning lights turn on or flash. If a light turns on or flashes, but then turns off, this does not necessarily indicate a malfunction in the system ...

    StabiliTrak® System
    The vehicle has a vehicle stability enhancement system called StabiliTrak. It is an advanced computer controlled system that assists with directional control of the vehicle in difficult driving co ...