Subaru Forester: Headlights
Headlights
To turn on the headlights, turn the knob on the end of the turn signal lever.
first position
Instrument panel illumination, tail lights, front side marker lights and license plate lights are on.
second position
Headlights, instrument panel illumination, tail lights, front side marker lights, and license plate lights are on.
Light control switch
The light control switch only operates when the ignition key is inserted into the ignition switch. Regardless of the position of the light control switch, the illuminated lights are turned of ...High/low beam change (dimmer)
High/low beam change (dimmer) To change from low beam to high beam, push the turn signal lever forward. When the headlights are on high beam, the high beam indicator light “” on the c ...See also:
Electronic Stability Program (ESP®)
ESP® is a registered trademark of DaimlerChrysler AG. The Electronic Stability
Program (ESP®) helps to control the vehicle during cornering if the vehicle is understeering
or oversteering. It al ...
Reinserting the key blade in the remote key
1. Hold the remote key with the slot for the
key blade up.
2. Carefully slide the key blade into its groove.
3. Gently press the key blade in the groove
until it clicks into place. ...
Securing the load
There are tie down hooks located in the cargo
area as shown. The tie down hooks can be used
to secure cargo with ropes or other types of
straps.
Do not apply a total load of more than 22
lb ...