GMC Terrain: Exterior Lighting - Initial Drive Information - In Brief - GMC Terrain Owner's ManualGMC Terrain: Exterior Lighting

The exterior lamp control is located on the turn signal/lane change lever.

The exterior lamp control is located on the turn signal/lane change lever.

: Turns the exterior lamps off.: Turn to operate the exterior lamps.

AUTO: Turns the exterior lamps on and off automatically depending on the exterior : Turns the exterior lamps off.

AUTO: Turns the exterior lamps on and off automatically depending on the exterior light.

with the sidemarker lamps, taillamps, license plate lamps, and instrument panel: Turns on the parking lamps, together with the sidemarker lamps, taillamps, license plate lamps, and instrument panel lights.

with the parking lamps, sidemarker lamps, taillamps, license plate lamps, and instrument : Turns on the headlamps, together with the parking lamps, sidemarker lamps, taillamps, license plate lamps, and instrument panel lights.

For more information, see:

○ Exterior Lamp Controls on page 6‑1.

○ Daytime Running Lamps (DRL) on page 6‑2.

○ Fog Lamps on page 6‑4.

    Center Dome Lamps
    There are front and rear dome lamps. The dome lamp controls are located in the overhead console. To change the settings, press the following: : Turns the lamp off, even when a door is open. : ...

    Windshield Wiper/Washer
    The windshield wiper/washer lever is located on the right side of the steering column. With the ignition in ACC/ACCESSORY or ON/RUN/ START, move the windshield wiper lever to select the wiper sp ...

    See also:

    Unlocking the phonebook
    1. Select the “PHBK UNLOCK”/“PHONEBOOK UNLOCK” menu. Then “CURRENT PIN?” is displayed. NOTE If the phonebook is not locked, “UNLOCK” is displayed and the mode changes to the ...

    Shifting out of Park
    To shift out of P (Park): 1. Apply the brake pedal. 2. Turn the ignition to ON/RUN. 3. Press the shift lever button. 4. Move the shift lever. If you still are unable to shift out of P (Park): 1. ...

    Auto mode
    AUTO mode should be used as the normal operating mode. The air conditioning, heating and ventilation controls automatically provide an optimum environment at the selected temperature. To resume f ...