Volvo XC60: Engine oil
Engine oil must meet the minimum ILSAC specification GF-4, API SL, or ACEA A1/B1.
Lower quality oils may not offer the same fuel economy, engine performance, or engine protection.
Volvo recommends Castrol.
Depending on your driving habits, premium or synthetic oils may provide superior fuel economy and engine protection. Consult your Volvo retailer for recommendations on premium or synthetic oils.
Oil additives must not be used.
Synthetic oil is not used when the oil is changed at the normal maintenance services.
This oil is only used at customer request, at additional charge. Please consult your Volvo retailer.
Oil viscosity
Incorrect viscosity oil can shorten engine life under normal use. SAE 5W-30 will provide good fuel economy and engine protection. See the viscosity chart.
Viscosity chart
Extreme engine operation
Synthetic oils meeting SAE 0W-30 or 0W-40 and complying with oil quality requirements are recommended for driving in areas of sustained temperature extremes (hot or cold), when towing a trailer over long distances, and for prolonged driving in mountainous areas.
American Petroleum Institute (API) symbol
The API Service Symbol "donut" is divided into three parts:
• The upper section describes the oil's performance level.
• The center identifies the oil's viscosity.
• The lower section indicates whether the oil has demonstrated energy-conserving properties in a standard test in comparison to a reference oil.
Engine specifications
A This engine may not be available on all markets ...Oil volume
...See also:
Convenience
Activating/deactivating the EASYENTRY/ EXIT feature
You can use the Easy Entry/Exit: function to activate or deactivate the EASY
ENTRY/ EXIT feature ().
WARNING
You must make sure no one can ...
Troubleshooting
Applicable to every device
Radio
CD
Error display
This unit has a number of self-diagnostic functions to protect the system. If
a problem should occur, the display shows the type of error. ...
Starting the Vehicle
1. Press and release on the Remote
Keyless Entry transmitter.
2. Press and hold for about two
seconds. The turn signal lamps will briefly flash to confirm the vehicle has been
started. The pa ...