Mitsubishi Outlander: Doors
CAUTION:
● Make sure the doors are closed: driving with doors not completely closed is dangerous.
● Never leave children in the vehicle unattended.
● Be careful not to lock the doors while the keys is inside the vehicle.
NOTE:
● When the driver’s door is open, neither the key nor the lock knob can be used
to lock it.
To lock or unlock with the key
1- Lock. 2- Unlock.
NOTE:
● If the vehicle is equipped with the keyless operation system, the doors can be
locked or unlocked with the emergency key. Refer to “Emergency keys” on page 1-25.
To lock or unlock from inside the vehicle
1- Lock. 2- Unlock.
Pull the inside door handle toward you to open the door.
NOTE:
● The driver’s door can be opened without using the lock knob by pulling the inside
door handle.
● In a vehicle that has a Dead Lock System, it is not possible to unlock the door
by pushing the lock knob to the unlock side while the Dead Lock System is set (refer
to “Dead Lock System” on page 1-40).
To lock without using the key
Front passenger’s door, Rear door
Set the inside lock knob (1) to the locked position and close the door (2).
NOTE:
● The driver’s door cannot be locked using the inside lock knob while the driver’s
door is opened.
Ignition switch on reminder system
When the engine was started using the keyless operation function
If the driver’s door is opened with the ignition switch in any position other than “LOCK” (PUSH OFF), the ignition switch on reminder buzzer sounds intermittently to remind you to turn off the ignition switch. In addition, “STEERING WHEEL LOCK” will be displayed on the information screen in the multi-information display.
Keyless operation system*
The keyless operation system allows you to lock and unlock the doors and tailgate and start the engine simply by carrying the keyless operation key with you. The keyless operation key can also be ...Central door locks
Vehicles without the keyless entry system and vehicles without the keyless operation system Using the key on driver’s door locks or unlocks driver’s doors and the tailgate. 1- Lock. 2- Unloc ...See also:
MB Info call button
Press and hold MB Info call button 1 for more than two seconds. This initiates
a call to the Mercedes-Benz Customer Assistance Center. The indicator lamp in
MB Info call button 1 flashes wh ...
Bluetooth version information
This feature offers information about the
Bluetooth version installed in the vehicle's
infotainment system. This information can be
found under Bluetooth menu
Bluetooth
software version in ...
Set speed dial
1. Select the “SET SPD DIAL”/“SET
SPEED DIAL” menu.
2. Select the phone number by operating
the “TUNE/TRACK/CH” dial/by pressing
the talk
switch and saying the voice
tag.
3. Se ...